Scott shaeffer of san juan carpentry shows us how to build table tops from mill-cut logs. this video is a bit dated. to see a more updated version of this task click the following link: this video is a bit dated.. To make a table, start by purchasing sheets of wood, like pine or poplar. then, cut the wood to size and assemble the table top using tongue and groove planking, glue, and clamps. after you've assembled the top, screw or glue 4 strips of wood around the bottom of the table to make the under table. next, cut 4 table legs that are all the same. In this project, the table legs and apron were ordered from an online woodworker supply catalog, and reclaimed wood is used for the top. the legs are attached to the apron with precut mortises and tenons. apply wood glue to the mortise of one leg, then use a brush to spread the glue evenly (image 1)..
Sophie heawood with her wooden kitchen table, made at the goodlife centre in london. photograph: graeme robertson for the guardian i can pinpoint exactly when i decided to learn woodwork. i had gone on the website of a certain scandi superstore and ordered far too many shelving units late at night. Elongate the bracket holes in the top a bit to allow for the wood to expand and contract with changes in humidity. sand the table smooth. start with 80-grit sandpaper, and move to a finer grit for each pass. you should end with 220-grit. i finished the table with two coats of jacobean-tinted polyurethane, then buffed on a couple of coats of wax. Create a space in the table top to place books into. apply wood glue over the top edge of the podium and fix the hardwood strip. also fix nails into it to keep it fixed. apply wood glue over the top edge of the podium and fix the hardwood strip. also fix nails into it to keep it fixed..
0 komentar:
Posting Komentar